Material Care
Powder Coated EG Steel (Bamboo Brown)
Characteristics
A resilient, baked-on polymer coating over protective zinc-layered steel.
Routine Care
Wipe surfaces with a soft, clean cloth dampened with lukewarm water and a pH-neutral soap. Best practice is to dry the surface immediately with a lint-free cloth to prevent water spotting.
What to Avoid
Avoid using abrasive sponges, scouring pads, or scouring creams, as they may scratch the surface. Do not use solvents, acetic acid, or citric acid, as these may have an adverse effect on the coating.
Non-Directional Stainless Steel
Characteristics
A sophisticated, matte-like finish achieved through uniform, multidirectional abrasion.
Routine Care
Clean with a soft cloth using pH-neutral soap and water. Wipe in gentle circular motions to maintain the uniform aesthetic of the finish.
What to Avoid
Avoid chloride-based cleaners or bleach. Do not use steel wool or metal brushes, as these can contaminate the stainless steel and lead to surface rust.
Bead Blasted Stainless Steel
Characteristics
A textured, non-reflective satin finish created by architectural glass-bead impact.
Routine Care
Use a soft sponge with lukewarm water and a mild detergent to lift dust and oils from the micro-textured surface. Rinse thoroughly and pat dry with a soft cloth.
What to Avoid
Avoid lint-heavy cloths that may snag on the textured surface. Do not apply waxes or oil-based polishes, as these can sit within the texture and cause uneven discoloration over time.
Polished Stainless Steel
Characteristics
A high-luster, reflective finish highlighting the meticulous geometry and architectural form of the piece.
Routine Care
Use a clean microfiber cloth with a dedicated glass cleaner or a 50/50 solution of water and isopropyl alcohol. Wipe in a consistent direction to maintain mirror-like clarity.
What to Avoid
Avoid any cloth containing grit or debris, as this will cause visible swirl scratches on the reflective surface. Do not use heavy-duty degreasers that may leave an oily film.
Clear Tempered Glass
Characteristics
High-strength, non-tinted safety glass designed for transparency, durability, and visual lightness.
Routine Care
Clean with a standard glass cleaner and a soft, lint-free cloth. Wipe in a consistent pattern to ensure a streak-free finish.
What to Avoid
Avoid "point-loading" by placing extremely heavy or sharp objects directly on the glass surface. Never use abrasive powders or metal scrapers, as these can compromise the integrity of the safety glass.
General Precautions
The Nature of Steel
Populate stainless steel finishes are celebrated for their raw, architectural honesty. As we do not apply synthetic anti-fingerprint coatings, your pieces will naturally gather prints through use—we invite you to maintain their clarity through the simple routine care outlined above.
Damage Policy
To maintain clarity and fairness, we cannot be held responsible for damages that occur after delivery, including damage caused by accidental mishandling or improper cleaning methods.
